SafeWalk
Auto-sneaks when you get close to a block edge to prevent falling off.
Recommended settings
Mode: Sneak (Keybind) | Minimum pitch: 70° | Edge tolerance: Medium or Very High Enable Blocks only, Disable on forward.
Mode
How SafeWalk prevents you from walking off edges.
- Edge — moves your position away from the edge client-side
- Sneak (Keybind) — simulates holding the sneak key (recommended)
- Sneak (State) — sets the sneak state flag directly
- Scaffold — special mode optimized for use with the Scaffold module
TIP
Sneak (Keybind) feels most natural and is the most compatible with other modules.
Edge tolerance
How close to an edge before sneaking activates. Higher values trigger sneak earlier, giving you a bigger safety margin.
Options: Low, Medium, High, Very High.
TIP
Medium is a good balance. Very High is safer but makes you sneak noticeably early.
Minimum pitch
The downward look angle required before SafeWalk activates. Setting this high (70° or more) means SafeWalk only activates when you're actually looking down — useful for Scaffold where you don't want SafeWalk interfering during normal movement.
Range: 0-90°.
Blocks only
Only prevent falls when holding a block. Limits SafeWalk to bridging situations.
Disable on forward
Disable when pressing the forward key. This lets you intentionally walk off an edge by holding W, while SafeWalk still protects you when you're standing still or strafing.
TIP
Enable this — makes SafeWalk much less intrusive during normal movement.
Only while right clicking
Only activate while holding right-click.
Unsneak delay
Ticks to wait before releasing sneak after you've moved away from an edge.
Range: 0-20 ticks.